Many people will install light strips inside when installing cabinets, so that they will not be touched when taking things from the cabinets, and it can also play a decorative role. The details of installing the cabinet light belt slot are more important, so how to make the cabinet light belt slot suitable? We together look.

The installation steps of the cabinet light belt slotted:

1. First determine the size of the light strip, and then open a slot similar to the size of the aluminum strip.

2. Insert the aluminum strip into the slot, and make two small holes at both ends of the slot to connect the wires.

3. After the wires are connected, put the LED strip into the aluminum strip slot, and then the installation is complete.

The main points of the cabinet lamp belt slotting installation:

1. At the installation position, the thickness of the plate must be more than 18 centimeters to be grooved, and the plate that is too thin cannot be grooved.

2. If the light strip is rolled up, the light strip cannot be lit. When cutting the light strip, pay attention to cutting at the mark on the light strip to avoid causing non-lighting.

3. The installed wires should not be exposed, clean the burrs and wrap them with insulating tape to avoid electric shock.

4. The installation of the light strip must be done when the power is cut off, and the power supply can be connected after it is connected to avoid danger.

5. Don't knock the tube with hard objects during the installation process. If there is damage in the middle, the whole tube needs to be replaced.

Light strips are widely used and easy to install. Therefore, it is a good way to install light strips in cabinets. The above is the answer to the appropriate content on how to make the slotting of the cabinet light strips. If you want to know more about cabinet lights , you can pay attention to Jie Deweier. As a global cabinet intelligent lighting driver, you will surely give you a different surprise!