Time:2020-07-18 Views:
The wardrobe light is very usable. Even if the wardrobe is placed in a place that is not very bright, the wardrobe light can also illuminate the blind area of the wardrobe. In many shopping malls, hangers and display cabinets will be equipped with light tubes, which can not only increase the beauty of the clothes, but also increase the beauty of the space.
Among them, the wardrobe induction lamp is not the kind of voice-activated lamp we common, but the real human body infrared induction light-sensitive lamp. The induction lamp is actually a time-delayed automatic switch control circuit. If the human body infrared thermal sensor module senses that someone is moving within its range, the pyroelectric effect will release electric charges, and the electrical signal will prompt the time-delay switch module Turn on the light, and the delay switch has a set value within 60 seconds. When the person is continuously within the sensing range, the LED human body sensing light is always on. How to keep the power supply of the induction lamp belt in the wardrobe? Generally, the wardrobe lamp power supply is installed on the second layer of the uppermost layer. In order to avoid electric shock to children, it is best not to install it on the lowermost layer.
Does the wardrobe sensor light belt need to be connected to the outside wire? Generally speaking, the wiring arrangement of the wardrobe lamp belt should first be reserved, take the lamp belt and walk around the cabinet, leave the power cord, and then find the power cord to connect to the lamp belt . When making the wardrobe, fix the wires in the wardrobe and install the lights. There is no need to connect an external wire to it, just use a rechargeable battery to supply power.
Jedver’s Tips: Concealed wiring for wardrobe lights is divided into concealed wiring and exposed wiring: concealed wiring needs to be punched from the laminate; for exposed wiring, the buckle of the light must be installed in the wardrobe light, and then the light Buckle in the buckle, and finally punch a hole from the back panel on the back.