Many people ignore the lighting optimization of the cabinet. The problems of shadow areas formed by human body occlusion and multiple compartments are common problems encountered in the use of cabinets. Relying only on the ceiling downlighting lamps without special cabinet lighting, the light will inevitably be blocked by the wall cabinets, range hoods and the human body, causing the cabinet to become a blind spot for lighting, so that when performing activities such as placing dishes Very inconvenient. Therefore, as an important storage space in the kitchen, cabinets are worthy of careful design from lighting design to LED downlight applications. How to make downlights under the cabinet? Let's start with the ergonomics in the kitchen.

From the perspective of cabinet specifications, humanized cabinets are determined according to the height of the specific person at home, not the general standard height. The height should be set at 2.5+1/2 centimeters of the height of the cook. If it is based on the height of a Chinese, a table top of around 84-2200px is the best. The installation of the wall cabinet should meet the two principles of "easy to take things" and "not to meet", and it is best to be about 70 cm above the countertop.

After the cabinet specifications are rationalized, you can start to optimize the lighting. Generally, the average illuminance of cabinets is about 350Lx. Cabinet lights need to be refined and matched. Lighting should be arranged inside the wall cabinet, above the cabinet operating table, and at the corner of the ground, so as to ensure that the cabinet is more convenient to use. How to create abundant cabinet lighting?

1. There must be light on the working surface

2. The local area should also be brightened

Downlights are undoubtedly a good choice. The energy consumption of white LEDs is only 2/5 of that of energy-saving lamps and 1/10 of that of incandescent lamps, and the theoretical life span can exceed 100,000 hours. For ordinary home lighting, it can be said to be once and for all. To make downlights under the cabinets, pay attention to the following aspects:

1. First, check after opening the LED downlight package to see if the product is intact.

2. Before installing the lamp, always cut off the power supply first to ensure that the switch is in the closed state. After lighting the lamp, in order to prevent kitchen electricity, do not touch the surface of the lamp directly with your hands.

3. Before use, confirm the applicable power supply according to the number of installations required. Downlight products are only suitable for indoor applications, and waterproof installation should be paid attention to outdoor applications.

4. Because the product is a lamp with high-voltage power supply, in order not to affect its life, try not to use it in the state of frequent power-on and power-off.

5. If you need to stop using it for a long time, place it in a dry, cool and clean environment.

In terms of cabinet lighting, Jedver’s small downlights are made of high-quality UV-resistant PC cover, 12mm ultra-thin design, and modular design, easy to install, with a lifespan of 50,000+ hours, uniform light output and no spot. It meets the requirements of the kitchen and also greatly guarantees the convenience of kitchen operation.