Light strips are generally installed at the corners of the ceiling and the corners of the walls. They can also be used as cabinet lights . They are mainly used as ambient lights. As long as you choose the right light strips and arrange them in a suitable location, the whole home environment can be seen. It looks more warm and bright. So how to wire the led flexible light strip during the wiring operation ?

First of all, it is necessary to judge whether low pressure or high pressure. If it is low voltage, find that there are two dots for every three lamp beads on the light strip, and solder the wires at the dots. But if it is high voltage, plug it in with a pin, and the 220V voltage on the plug street is just fine. Considering the safety of electricity, Jedver recommends that you use low-voltage electric start light strips.

Secondly, there is a kind of light strip that is connected in series by all the lamp beads, which requires a capacitive ballast type constant current driver (there is also a switch type constant current driver, suitable for driving the ground voltage light strip). Insert the two pins of the driver plug into the two lead wires of the light strip according to the correct polarity, and then insert the driver power plug into the 220V AC power socket.

The last one is that all the lamp beads are mixed and connected in series with a number of resistors. This lamp strip provides 12V DC power supply. The connection method is to directly connect the regulated or unregulated 12V DC power supply to the strip with two output wires. Plug the power plug into the 220V AC power socket. Of course, the 12C battery pack can also be used to directly drive this light strip.

The connection distance of the light strip is generally up to 20 meters. If it exceeds 20 meters, the light strip will easily generate heat, which will affect the life of the light strip.