Time:2020-04-17 Views:
The function of the wardrobe is mainly to meet the needs of users for storing, keeping, organizing and replacing clothes. Due to the relatively closed space in the closet, the inside of the closet is often dark, which not only affects the efficiency of daily tidying and selection of clothes, but also the dim clothes also seriously affects the mood when dressing up, so it is necessary to install a sensor closet lamp . So how to install the wardrobe lights? The following editor will talk about the installation of wardrobe lights .
1. What is a wardrobe sensor light
The closet induction lamp adopts the new high-efficiency white light LED technology, which is energy-saving and high-efficiency, energy-saving and explosion-proof, suitable for use in various places; secondary infrared detection and induction technology, with high sensitivity and anti-interference. Features such as fast response speed; the light turns on when the wardrobe door is opened, and the light turns off when the door is closed; humanized appearance design, aluminum alloy shell design, exquisite fashion; hidden fixing, only 2 screws can be installed; this kind of infrared sensor light It is widely used in wardrobes, cabinets, bookcases, rear boxes and other spaces.
2. Wardrobe lamp belt installation
Confirm the voltage. Turn off the power before installation. The power cord is connected to 220VC, 50 (HZ), and fixed on the inside of the wardrobe through the chassis with 4×25 large flat-head self-tapping screws (required to be firmly fixed and safe). Wiring (connect one of the power cords of the lamp body with a terminal block and the live wire, and the other with a neutral wire, and then pull the wire block firmly after connection), whichever is true; install a light bulb, glass or back cover. You can power on for trial.
Third, the infrared sensor closet lights use
When using the closet sensor light for the first time, refer to the instructions, take out the battery box, install 6 AAA batteries, and put it back in the battery box. The first time the sensor works, it takes 30 seconds to 1 minute to test; when using it, please Place the sensing device outwards and the LED light downwards, because the sensor is a human body infrared sensor, if no heat source is detected, the LED sensor light will not be activated; if the sensor senses a human body heat source, it will continue to light for about 15 seconds, and then If there is no heat source, it will gradually extinguish.
Of course, the wardrobe sensor light can be installed or not. It depends on the individual. If the family's career is reversed day and night, the editor thinks that it is quite practical to install the wardrobe light in order to find clothes without affecting others. For more home furnishing information, please continue to pay attention to the website.