The cabinet light at home is inconspicuous, but without it, the entire kitchen cannot be activated. Today, let's take a look at the types of cabinet lights? What are the tips for installing cabinet lights?

1. Types of cabinet lights

There are many kinds of cabinet lights , there are many brands, the types are with switches, sensors, and ultra-thin forms.

2. Cabinet light installation

1. Technological process: line finding and positioning→frame and frame installation→wall cabinet, partition, fulcrum installation→wall (hanging) cabinet fan installation→hardware installation

2. Line finding and positioning: Before plastering, use the indoor uniform elevation line, according to the height of the wall cabinets and wall cabinets and the height of the upper and lower openings required by the design and construction drawings, and consider the relationship of the plastering thickness to determine the corresponding position.

3. Frame and rack installation, the frame and rack of wall cabinets and wall cabinets should be carried out before plastering indoors. After being installed in the correct position, two nails for each fixing part of the frame on both sides should be nailed to the wooden bricks on the wall. The cap must not be exposed. If the partition wall is aerated concrete or lightweight partition wall, it should be fixed according to the design requirements. If there is no design requirement, you can pre-drill a φ5mm hole with a depth of 70-100mm, and pre-bury a wooden wedge adhesive interface agent in the hole in advance, and then install the fixed cabinet after the hole is firmly bonded. When using steel cabinets, it is necessary to pre-embed iron parts at the position where the fixed frame of the opening is installed, and weld the frame parts. When the frame and rack are fixed, they should be calibrated, squared, hung upright, and the elevation, size, and position should be checked for accuracy before fixing.

The above is about the process of cabinet lights .