The LED smart sensor light is a new type of smart lighting product, which automatically controls the lighting of the light source through the sensor module. The shell material of the LED intelligent induction lamp adopts imported aluminum + PC cover, the light source adopts imported chip, the sensing range is 7-8m, the product safety specification complies with the CE standard, and the product complies with the relevant EU ROHS regulations. It is a new generation of green energy-saving lighting lamps.

        LED smart sensor light-function

        Based on the principle of Doppler effect, the LED smart induction lamp has independently developed a planar antenna transmitting and receiving circuit, intelligently detects the surrounding electromagnetic environment, and automatically adjusts its working state; the ultra-lighting power consumption is low in static state, generally 0.5-2.5W, according to needs Make adjustments. According to the environment, when a human body or a car enters, it will automatically produce full load work. 10-1 (0.6 or 1.2 meters lamp); induction sensitivity: 1.9 meters; average power consumption: 4.8 watts.

    Advantages of LED smart sensor light

    ▲Green lighting, pollution-free, recyclable, and mercury-free.

    ▲Low temperature characteristics can reduce the power consumption of indoor air conditioners.

    ▲Long life span of 60,000-80,000 hours, low luminous attenuation, 50,000-hour luminous flux maintenance rate is more than 70%.

    ▲Using the latest electronic ballast, its own loss is small, 10% lower than that of inductive ballast.

    ▲High luminous efficiency-luminous efficiency＞120Lm/W.

    ▲High color rendering index-color reproduction ability Ra> 90.

    ▲Fast start-up-light up when it is turned on.

    ▲No flicker-no visual fatigue.

    ▲Voltage range-can start normally between 150～264VAC.

    ▲High power factor-power factor> 0.98, reducing the investment in transmission line projects.

   Low-temperature start-up characteristics---start immediately at -40°C.

   ▲The sensing range is 7m-8m.

   Optional color temperature -4000K-6500K, can meet the needs of various occasions.

        LED smart sensor light installation method

        Turn off the power during installation, confirm the voltage, and connect the power cord to 220VC, 50(HZ). Wiring (one lamp power cord is connected to mitochondria and live wire, and the other neutral wire is connected, after connection, pull the mitochondria strongly) must not fall. That is to say, you can turn on the power for the first time, there will be three consecutive lights, indicating normal, but in the day or when the lights are strong and abnormal, when the light is dark, people can automatically turn on the lights. For example, in the daytime, cover the probe lens with a black cloth, after 10 seconds (no light transmission), you can also try to make the light work.

Precautions

Install induction lights in places where people often move (ceilings or walls) to improve their sensitivity and working range. Do not install on a damp ceiling or wall. When cleaning, please disconnect the power first. Please choose a non-corrosive cleaning agent when cleaning. After the LED smart sensor lamp is installed, acid or alkaline chemical solvents cannot be used in a certain space, otherwise it will damage the electroplating or painting