When decorating the home, many people choose to install wardrobe lights in the wardrobe, so how to slot the wardrobe lights? Good decoration can make the lighting effect better. How to plan and install the wiring, layout and size of the wardrobe lights ? Let's take a look together.

　　1. Determine the size of the light strip

　　Many people don't know much about the size of the LED light strip. In fact, the numbers 0603, 0805, 1210, 5050 refer to the size of the light-emitting elements used on the LED light strip, and the unit is English. For example, 0603 converted to metric is 1005, which means that the length of the LED element is 1.0mm and the width is 0.5mm. The industry abbreviation is 1005, and the British system is called 0603; 0805 is converted to metric system is 2125, which means that the length of the LED component is 2.0mm and the width is 1.25mm. The industry abbreviation is 2125, and the British system is called 0805, and so on. The size of the hidden light strip is generally between 250mm-1000mm.

　　When installing, first determine the length of the LED to be installed, and then intercept the integer. Generally, there will be a small scissors mark every meter on the light strip, which can only be cut at the sign when installing. If the cut is wrong, the light strip of this unit will not light up.

　　2. Slot according to size

　　The wardrobe design is integrated with the overall home decoration, and it is closely related to the spatial layout, wiring and pipe measurement schemes, so this step is generally the task of the decoration master. After slotting, you can insert the wardrobe light strip here.

　　Of course, we can also choose to slot first, and then buy LED strips or strips according to the size of the lamp slot. Nowadays, there are many different sizes of LED strips in China, which can be applied to different slot sizes and different color temperature requirements. With a long extension cord, it will be on when plugged in, and it can be hidden on the side of the laminate.

　　Three, hole-punch wiring

　　The hole-punching wiring is used to drill holes to introduce the power cord. You can use an electric drill to drill holes in the small wooden square of the shelf cabinet, and then introduce the power cord into the lamp trough, slot the wiring on the shelf, and make small holes on the back panel , Let the line pass.

　　Fourth, the installation is fixed

　　After opening the light trough, pulling the wire and power switch, you need to fix the light strip with nails or glue. When installing, you need to arrange the light strip, pay attention to the light-emitting part, and then put it into the light trough. Then connect the power supply nearby. Note that if it is a low-voltage light strip, it may need to be used with a transformer, otherwise the light strip may be burned out. It is recommended to consult a good merchant when buying.