First, a lighting LED lamps collectively refers to light-transmissive, and changes assignment LED fixture light source distribution, including other LED external source for securing and protection of all the LED light source all the necessary parts and components, and connected to a power The necessary line accessories. With the further maturity of LED technology, LED will achieve more and better development in the field of room lighting design and development.

　　The current room lighting design will take the LED lighting design as the mainstream, while fully embodying the development trend of energy-saving, healthy, artistic and humanized lighting, and become the dominant room lighting culture. In the new century, LED lightingGube will illuminate everyone's room, change everyone's life, and become a great change in the development and design of lamps.

　　Then the installation procedure is when the lighting fixture is installed, it should be carried out after the civil construction decoration is completed , the single-stranded wire can be directly connected to the lamp , and the multi-stranded wire should be tinned and connected to the appliance after crimping the terminal . The socket phase sequence is left zero and right fire. The upper grounding , the switch should be controlled by the fire , and then connected to the lamp . Large lamps have safety guarantee measures , special places lamps should have shock absorption measures , and various box panels and large lamps have reliable grounding. The model and specifications of lighting fixtures must meet the design requirements , and the installation elevation must meet the requirements of the design and construction specifications.

When installing a row of lighting fixtures , the allowable deviation of the center line is not more than 5mm, and the wire enters the fixture with good insulation and margin , and the contact is tight. When the switch panels are arranged in a row , the height should be the same , and the height difference should not be more than 2mm. The height of the switches and sockets on the same floor should be the same , and the allowable deviation should not be more than 5mm .

　　Although the ceiling installation method are similar, small series is recommended to look at the manual, some LED ceiling lamps, special design, it may be noted that certain details during installation.