The led light belt can be said to be very popular because of its rich colors and strong decorative effect, which can meet the needs of different places, so it is favored by more and more consumers.

　　So, what color should we choose when choosing a light strip, and how to choose a good light strip?

　　1. What color looks good on the cabinet lights:

　　1. The choice of lamp color, it should be said that radish and green vegetables have their own loves, and they cannot be one side. The editor can only give you some small suggestions. Generally speaking, choose light colors such as white. According to the usage, the kitchen usually uses red light and orange light. Red gives people a warm and natural feeling, especially in cold winter. More comprehensible. Orange can make your room appear taller, deeper, and more inner.

　　2. If you like a festive color, you can choose red. If you choose a red and blue light strip with a controller, it will give people a particularly romantic feeling. The restaurant is more suitable for yellow light strips; the children's room is suitable for yellow and colored light strips; but it is better to have one color light strip per room, otherwise it will feel very dazzling.

　　With the development of technology, the use of Symphony LED strips is now more widely used. Because of its product characteristics, each pixel has an IC chip, so it is not a problem what color and change mode the customer needs, and can be adjusted and controlled. The system is adjusted, and the use of interior decoration is also increasing.

　　2. How to choose the cabinet light belt?

　　1. Look at the solder joints of LED strips produced by regular manufacturers. It uses SMT patch technology and uses solder paste and reflow soldering technology. Therefore, the solder joints of the LED light strip are very lubricated, the amount of solder is small, and the solder joints are arc-shaped. The solder joints of low-quality LED lights are uneven, and many layers of dots cover the solder feet, which affects the aesthetics.

　　2. Look at the quality of FPC. FPC is divided into two types: copper-clad and rolled copper. The copper foil of the copper-clad board is protruding, which can be seen from the connection between the pad and the FPC. The rolled copper is closely connected to the FPC and can be bent arbitrarily without falling off the pad. If the copper-clad board is bent too much, the pad will fall, and if the temperature is too high during maintenance, the pad will fall.

　　3. Look at the cleanliness of the surface of the LED cabinet lamp. The SMT process lamp is very clean, and almost all impurities and stains are seen on the surface. If the lamp strip is hand-soldered, some stains and cleaning marks will remain on the surface how to wash it.

　　4. Look at the packaging. Regular LED cabinet light strips will be packaged in anti-static coils, usually 5 meters per roll or 10 meters per roll, and then sealed with anti-static and moisture-proof packaging bags on the outside. The counterfeit version of the LED light strip is cost-saving, and chooses to take back the reel. There is no anti-static and moisture-proof packaging bag. If you look carefully at the reel, you can see that there are marks and scratches on the surface when the label is removed.

　　5. Look at the light strips produced by regular label manufacturers. There are printed labels on the packaging bag and reel, not printed labels. Inferior light strip labels are printed, and the parameters are different.

　　6. Look at the attachment. The regular LED cabinet light belt will be equipped with instructions for use and the standard book of the light belt in the packing box, and will also be equipped with an LED light belt adapter or card holder. However, these accessories are not included in the packaging box of the counterfeit version of the LED light strip, because some manufacturers can save everything after all.

　　The above is to teach you how to choose the color of the light strip and several ways to identify the quality of the light strip. I hope to help friends who want to buy the light strip.