Installing light strips is already a choice for many home decorations. On the one hand, it can make the kitchen look more beautiful, and on the other hand, it can also get a good lighting effect. So how to install the light strip of the cabinet?

First, determine the installation location.
Before installing the cabinet light strip, all you need to do is find the line and locate it. This can be designed together when you design the decoration drawings, but it must be accurate when positioning, especially the height of the installation, otherwise the later improvement may be more troublesome.
Second, after installing the frame and
finding the location, it is necessary to install the frame. However, when installing the frame, you need to pay attention to that the nails must be hidden, otherwise it will not only affect the appearance, but also may scratch yourself. The installation of the frame must be done before plastering, otherwise the installation process will become very troublesome.
Third, install the light strips
. After your frame is installed, you can install the light strips. When installing the light strip, pay attention to choosing the appropriate size, so as to ensure the overall appearance. There are also some precautions when
installing cabinet light strips. The following points should be paid attention to.
First of all, when you install the light strip, be sure to cut off the power supply. Electricity is still a terrible thing, and it is obvious to all that it is killed. When installing, you must be aware of safety, and perform the installation after cutting off the power supply.

Secondly, if the sun can shine on the position of the light strip you installed, then you need to change a place to install it. Because of the sunlight, it is likely to cause some accidents. In order to avoid these accidents, light strips should not be installed in places exposed to sunlight.
Then, the wood screws you need to use should also be kept away from fire sources or places with extremely high temperatures. It is safer to fix the wood screws on non-flammable objects. When designing the cabinet, if you have decided to install the light strip, you should design the height of the wall cabinet. If it is too low, it will not be easy to install the light strip.
Finally, when installing the induction switch, it is not possible to place the switch too close to the lamp. Because the temperature is too high or the light is too bright, the sensor switch may be triggered. The sensor switch should keep a distance of more than 50 cm from the light strip to ensure safety.
When installing the light strip, not only the aesthetics of the overall design should be considered, but also the safety during use should be considered. Safety should be the first priority to prevent all accidents. When designing and installing, everyone should take these precautions into consideration.

The above is the experience of the editor installing the cabinet light strip