Although the bathroom lamp looks inconspicuous, it is a very important light source for the bathroom. After all, the bathroom space is relatively small. Considering its special function, the windows will also be opened relatively small. It is difficult for natural light to fully enter the bathroom, resulting in insufficient light in the bathroom. The special environment of the bathroom has certain requirements for its lamp. The bathroom lamp has the functions of waterproof and moisture-proof to extend its service life in the bathroom.

The purchase of bathroom lights

Bathroom lamps are greatly affected by the area of use, and they are mostly installed in simple and compact styles. Crystal chandeliers and table lamps are not suitable. The bathroom lamp must reflect its high water resistance in function. The bathroom has high humidity. In terms of material, do not choose paper or iron lamps to avoid decay, rust and mold due to long-term use. As for the light source, the bathroom lighting should choose a light source with high color rendering to appear real. Try to choose daylight and warm light sources, which can be used as daily lighting and warm light, which is practical and comfortable.

The choice of bathroom lights should consider safety. In addition to being waterproof, avoid sharp and protruding corners for all lamps that can be touched by the human body. Don't choose exposed bulbs with huge heat. People generally wear less clothes in the bathroom, which is easy to get burned.

The choice of bathroom lights in different directions is different

 Do not use any lighting fixtures in the area near the toilet, and use fixtures with waterproof coefficients higher than IP44 and IP21 for the area near the door and the area away from the door respectively. For other areas that are not in the above areas or more than 3 meters away from the shower or bathtub, use lamps with a waterproof coefficient of IP21 or more.

Different sizes of bathroom space lamps have different choices

1. For bathrooms with large spaces, you can choose wall lamps to create a strong lighting effect. Install a downlight on the top of the toilet, bathtub, and shower to illuminate each key area. In this case, you don't need to install a ceiling lamp. Most of the shower columns are equipped with soft light lamps near the top nozzles, so there is no need to install lamps in the shower area.
2. A small area bathroom should be equipped with lamps in the center of the ceiling to extend the space.

Bathroom lamp maintenance method

1. The bathroom lamp should be protected by a moisture-proof lampshade to prevent the lamp from being damp and extend its service life.
2. When cleaning and maintaining the bathroom lamp, do not disassemble or replace the parts casually, change the structure, and restore the original state after cleaning and maintenance, and the parts must be fully installed.
3. Wipe and clean the lamp tube with a dry cloth to prevent moisture in the bathroom from entering the lamp tube, so as to prevent the lamp from being rusted and damaged or even leaking and short-circuiting during future use.
4. The lampshade on the cloth surface should be cleaned with dry detergent. Do not touch the water. The glass lampshade can be washed with water, and the lamp holder should be gently wiped with a cloth.
5. Wipe the lamp body from top to bottom with a soft dry cotton cloth, don't rub it back and forth.
6. The front light of the bathroom mirror can be cleaned with vinegar. The method is to mix a beer bottle cap vinegar with half a basin of water, use a rag soaked in the vinegar water, wring it out and wipe it to achieve a cleaning effect while effectively preventing static electricity. 

How to install and disassemble the bathroom light?

The main lamp of the bathroom lamp is usually the ceiling lamp on the ceiling. Generally, there will be a card damage on the left and right sides of this bathroom lamp. Use your thumb to stick the lampshade, and the index finger will first remove the card damage on one side and remove it. Remove the damaged card on the other side. The method of installation is to fix the card damage on one side first, and then press the other side upwards. When you hear a click, the installation is complete.
Usually it is stuck clockwise, and it can be withdrawn counterclockwise. However, it is stuck due to dirt or other materials. The contact between glass and wood is too astringent, and you are afraid of breaking it because of the wrong force and angle, so you can’t remove it. Come down.

Disassembly method

1. Hold the lampshade in both hands and turn the side ditch counterclockwise.
2. Lightly tap the edge of the lamp shell with the wooden handle tool and turn it counterclockwise to loosen the dead spot.
3. Spray some lubricant to the connection between the lampshade and the lamp holder.
4. Break the lampshade. If the lamp goes out, the contact of the lamp holder may be in poor contact. Due to the high heat of the bulb, the bad lamp holder may be slightly melted and deformed.

installation method

1. Punch holes in the bathroom ceiling, and then knock the plastic gecko into the ceiling hole (ceiling the ceiling directly with screws to fix the ceiling plate)
2. After the power connection test is normal, remove the test light wire and connect the power supply according to the original test light wire. Please pay attention to the correct connection of the power cord.
3. Put the flat washer on the screw, and screw the screw clockwise into the plastic gecko compact ceiling plate through the hole of the construction site.
4. Install the lampshade, rotate the lampshade clockwise, and fix it on the ceiling plate.